Wrought Iron Fence Installation in Dallas–Fort Worth
Custom wrought iron fences built for the Texas climate. Local since 1997. Licensed and insured. Free on-site estimates across the DFW metroplex.
DFW's local wrought iron fence company since 1997
Autograph Construction is a Dallas–Fort Worth general contractor that has been building custom wrought iron fences for homeowners and businesses across North Texas since 1997. We design, fabricate, and install — not order panels from a catalog. Every fence is measured and welded to fit the property it's going on.
A lot of homeowners search for a "rod iron fence" — it's the same product. Whether you call it wrought iron or rod iron, you're looking at heavy, welded steel fencing that, when finished correctly, lasts decades in the Texas climate. We work on residential properties, custom estates, and commercial sites all across the DFW metroplex.
Looking for wrought iron fence installers near you in DFW? Start with a free on-site estimate — we'll walk the property, measure to fit the home and HOA, and give you a clear, written quote.
What we install
Custom wrought iron fencing for every kind of DFW property — built for the lot, not pulled off a warehouse shelf.
Custom residential & commercial fences
Full perimeter wrought iron fencing for homes, estates, and commercial properties across DFW.
Fence panels, posts, repairs & replacements
Wrought iron fence panel installation, post replacement, and section repairs — not just full new builds.
Fences on sloped or uneven grade
Racked or stepped wrought iron installations that follow your lot without leaving gaps at the bottom.
Decorative styles
Scrollwork, decorative tops, finials, and matched masonry-to-iron transitions for higher-end curb appeal.
Security fencing
Taller, solid runs designed to be hard to climb while keeping sightlines and natural light open.
Pedestrian & driveway gates
Matching pedestrian gates and custom driveway gates, including automated keypad and remote entry.
Built to last in the Texas climate
DFW heat, humidity, and sudden rain are brutal on bare metal. The finish — not the iron itself — separates a fence that lasts decades from one that's bleeding rust by next summer. Most cheap iron fences fail at the welds first; ours don't.
- 1
Treat the bare metal
Galvanizing or rust-inhibiting primer first — before a single coat of color.
- 2
Baked powder-coat finish
A hard, even seal rated for DFW weather. Not a thin coat of spray paint.
- 3
Custom fabrication, not big-box panels
Welded to fit the property, with welds ground and coated — never left exposed to rust.
Our process
A real consultation with a local team — not a faceless quote from a call center.
- 1
Free on-site estimate
We walk the property, take measurements, and discuss heights, gates, and HOA requirements.
- 2
Custom design
We draw the fence to your property — picket spacing, top design, gate locations, and slope handling.
- 3
Fabrication
Panels and gates are welded to your measurements, then prepped, primed, and powder-coated.
- 4
Professional installation
Our crew sets posts in concrete footings, hangs panels and gates, and walks the finished work with you.
What DFW homeowners say
[PLACEHOLDER — paste a real Google review here, 2–4 sentences, focused on the fence work, the crew, and the finished property.]
— [Real customer name / city]
[PLACEHOLDER — paste a real Google review here, 2–4 sentences, focused on the fence work, the crew, and the finished property.]
— [Real customer name / city]
[PLACEHOLDER — paste a real Google review here, 2–4 sentences, focused on the fence work, the crew, and the finished property.]
— [Real customer name / city]
What a wrought iron fence costs in DFW
We don't post a fake price online — the real number depends on your property. Honest wrought iron fence install cost in DFW is driven by:
- Linear footage of fence
- Fence height (4 ft, 5 ft, 6 ft, taller security runs)
- Design complexity — pickets, scrollwork, decorative tops
- Number and size of gates (pedestrian vs. automated driveway)
- Terrain and slope — racked vs. stepped installation
- Site access for fabrication crews and footing equipment
The best way to find out what your fence will actually cost is a free on-site measure. We'll give you a clear, written estimate — no pressure, no upsell.
Get a Free EstimateFrequently asked questions
How much does a wrought iron fence cost in DFW?
Wrought iron fence cost depends on linear footage, fence height, design complexity, the number of gates, terrain (slope and grade), and site access. Simple residential runs are priced very differently from custom driveway gates or commercial perimeters. We provide a clear, written estimate after a free on-site measure — no ballpark guesswork over the phone.
What's the difference between wrought iron and "rod iron"?
"Rod iron" is just a common misspelling of "wrought iron" — they refer to the same product. If you're searching for a "rod iron fence company near me" in Dallas–Fort Worth, you're looking for the same custom welded iron fencing we install.
Can you install a wrought iron fence on a slope or uneven ground?
Yes. Sloped and uneven lots are common in DFW. We handle wrought iron fence installation on slopes two ways: racking the panels so the pickets stay plumb while the top and bottom rails follow the grade, or stepping the panels in even drops between posts. We confirm which method fits your property during the on-site estimate.
Do you replace individual fence posts or panels?
Yes. We do wrought iron fence post installation and panel replacement as standalone repairs, not just full new builds. If a section was hit, leaning, or rusted out, we can match the existing design where possible and re-set posts in fresh concrete footings.
How long does a wrought iron fence last in the Texas climate?
A properly fabricated and finished wrought iron fence — galvanized or primed, then powder-coated, with welds ground and sealed — can hold its line and finish for decades in DFW. The finish and the install detail matter more than the iron itself. Cheap big-box panels with thin paint can show rust within a year here; custom-built iron does not.
Are you licensed and insured?
Yes — Autograph Construction has been a licensed and insured DFW general contractor since 1997. Texas Roofing License #1223708; HAAG Certified Storm Damage Inspector #991904014. Fence work is performed under our general contractor operations.
Do you offer a warranty?
Yes, our fence work is backed by a workmanship warranty. [PLACEHOLDER — confirm exact warranty terms and length with client before publishing; do not state a specific number of years until confirmed.]
What's your service area?
We install wrought iron fences across the Dallas–Fort Worth metroplex, including Dallas, Fort Worth, Frisco, Plano, McKinney, Prosper, Celina, and the surrounding communities.
Ready for a wrought iron fence built to last?
Tell us about your project and we'll set up a free on-site estimate — or call us directly and we'll get you on the schedule.
Quality is our Signature